NWIA149932B · Novalk · Interior · Water-Based
Thixo White Water Based Self Sealer 1K/2K Topcoat
Thixo White Water Based Self Sealer 1K/2K Topcoat
Product images are representative. Containers, labels, and packaging may differ from what's shown.
About this product
The white topcoat with the best coverage in the Novalk water-based line. 932 is thixotropic, so it holds on a vertical door at a full wet film and builds an even, opaque white without sagging, and it is self-sealing, so on sound previously finished cabinetry it can go over a scuff sand without a separate primer. Over raw or stained wood use 917B primer first. About 45% solids, 58 g/L VOC. Meets or exceeds KCMA standards for heat and humidity, cold check, chemical resistance and film swell.
Where it fits. White and tinted cabinet doors, built-ins, furniture and interior wood fixtures. This is the topcoat in the Starter Kit and the one our finishers have sprayed most.
Mixing. 1K straight from the can, or 2K with 5% hardener by volume for a harder, more washable film:
- NCW-105 long pot life: about 4 hours
- NCW-80: about 2 hours of pot life
Application. One or two coats at 4 to 6 wet mils, with surface, product and air above 54°F.
- Airless: 308 or 408 fine-finish tip at 1,600 to 2,100 psi
- HVLP: 5-stage turbine minimum, 1.8 or 2.0 needle, reduce 3 to 10% with warm water
- Brush or roll: add 5 to 10% 1034 flow additive
Novalk data sheet (rev. 8-2026).
- Spread rate: 120 to 140 g/m² per coat
- Vertical hold: 200 microns wet (about 8 mils)
- Yield: 4 to 6 m² per kg (about 43 to 65 sq ft per kg)
Interior use. Water clean-up. Sheens 5 (matte) through 90 (gloss); 15 is the sheen most shops standardize on. White base, tintable through Novotint.
Documentation
Configure your order