NWIA149932 · Novalk · Interior · Water-Based
Thixo Clear Water Based Self Sealer 1K/2K Topcoat
Thixo Clear Water Based Self Sealer 1K/2K Topcoat
Product images are representative. Containers, labels, and packaging may differ from what's shown.
About this product
Novalk 932 is the thixotropic topcoat in the water-based line: heavy-bodied, so it hangs on a vertical door and builds an even film without runs, and self-sealing, so the clear can go straight onto sanded bare wood. As a clear it gives wood a warm, slightly amber cast rather than the cool look of most waterbornes; Novalk describes it as a polyurethane look. About 35% solids, 58 g/L VOC. Novalk rates its resistance to sunscreen as excellent, and it meets or exceeds KCMA standards for heat and humidity, cold check, chemical resistance and film swell.
Where it fits. Clear-coated doors, panels, cabinetry, furniture and millwork where you want build and coverage from a self-sealer. Our finishers have sprayed it as the everyday clear on stained and natural doors.
Mixing. 1K straight from the can, or 2K with 5% hardener by volume for better mar and chemical resistance:
- NCW-105 long pot life: about 4 hours
- NCW-80: about 2 hours of pot life
Application. One or two coats at 5 to 6 wet mils, with surface, product and air above 54°F.
- Airless: 308 or 408 fine-finish tip at 1,600 to 2,100 psi
- HVLP: 5-stage turbine minimum, 1.8 or 2.0 needle, reduce 3 to 10% with warm water
- Brush or roll: add up to 10% 1034 flow additive to improve flow, or reduce 10% with water
Novalk data sheet (rev. 8-2026).
- Spread rate: 120 to 140 g/m² per coat
- Vertical hold: 200 microns wet (about 8 mils)
- Yield: 4 to 6 m² per kg (about 43 to 65 sq ft per kg)
Interior use. Low VOC, zero emissions, water clean-up. Sheens 5 (matte) through 90 (gloss); 15 is the sheen most shops standardize on.
Documentation
Configure your order