NWIA149921B · Novalk · Interior · Water-Based
White Water Based Self Sealer 1K/2K Topcoat
White Water Based Self Sealer 1K/2K Topcoat
Product images are representative. Containers, labels, and packaging may differ from what's shown.
About this product
Novalk 921 white is the quick, straightforward white in the water-based line: self-sealing in two coats, so sound previously finished surfaces need only a scuff sand, and fast, touch-dry in 30 minutes and sandable in an hour at 68°F and 40% humidity. Lighter-bodied than 932, it covers well, holds on a vertical, lays flat with a silky feel and is easy to rub out between coats. About 38% solids. Meets or exceeds KCMA standards for heat and humidity, cold check, chemical resistance and film swell.
Where it fits. Painted furniture, chairs, doors, shelving, trim and cabinet interiors. On raw or stained wood, prime with 917B first.
Mixing. 1K straight from the can, or 2K with 5% hardener by volume for a harder, more washable film:
- NCW-105 long pot life: about 4 hours
- NCW-80: 2 to 3 hours of pot life
If it needs thinning, add up to 10% 1034 flow reducer and mix well. Don't run a catalyzed mix through a pre-heater.
Application. Two coats at 4 wet mils, with surface, product and air above 54°F.
- Airless: 308 or 408 fine-finish tip at 1,700 to 2,200 psi
- HVLP: 4- or 5-stage turbine minimum, 1.8 or 2.0 needle, reduce 2 to 5% with warm water if needed
Novalk data sheet (rev. 8-2026).
- Spread rate: 100 to 140 g/m² per coat
- Vertical hold: 120 microns wet
- Yield: 4 to 6 m² per kg (about 43 to 65 sq ft per kg)
Interior use. Low VOC, zero emissions, water clean-up. Sheens 5 through 50 in 4 KG. White base, tintable.
Documentation
Configure your order