NWIA149921 · Novalk · Interior · Water-Based
Clear Water-Based Self-Sealer 1K/2K Topcoat
Clear water-based self-sealing topcoat — runs as 1K or 2K. Multiple sheen options.
Product images are representative. Containers, labels, and packaging may differ from what's shown.
About this product
Novalk 921 is the quick, straightforward clear in the water-based line. It is self-sealing in two coats, so it goes straight onto sanded bare wood, and it dries fast: touch-dry in 30 minutes and sandable in an hour at 68°F and 40% humidity. Lighter-bodied than 932 (about 28% solids), it lays flat and is easy to rub out between coats. It complies with EN 71-3, the European safety standard for finishes on children's furniture and toys.
Where it fits. Clear-coated furniture, shelving, trim and cabinet interiors where speed and clarity matter more than heavy build. Meets or exceeds KCMA standards.
Mixing. 1K straight from the can, or 2K with 5% hardener by volume for better mar and chemical resistance:
- NCW-105 long pot life: about 4 hours
- NCW-80: 2 to 3 hours of pot life
If it needs thinning, add up to 10% 1034 flow reducer and mix well. Don't run a catalyzed mix through a pre-heater.
Application. Two coats at 4 wet mils, with surface, product and air above 54°F.
- Airless: 308 or 408 fine-finish tip at 1,700 to 2,200 psi
- HVLP: 4- or 5-stage turbine minimum, 1.8 or 2.0 needle, reduce 2 to 5% with warm water if needed
Novalk data sheet (rev. 8-2026).
- Spread rate: 100 to 140 g/m² per coat
- Vertical hold: 120 microns wet
- Yield: 4 to 6 m² per kg (about 43 to 65 sq ft per kg)
Interior use. Low VOC, zero emissions, water clean-up. Sheens 5 through 50 in 4 KG.
Documentation
Configure your order