NWEA149892 · Novalk · Exterior · Water-Based
Clear Exterior For Metal, Wood, & Plastic
Clear Exterior For Metal, Wood, & Plastic
Product images are representative. Containers, labels, and packaging may differ from what's shown.
About this product
Novalk 892 clear is the catalyzed exterior finish: a 2K topcoat (about 37% solids) with UV blockers, built for the surfaces that take the most weather and the most handling. It bonds to wood, and with proper prep to metal, aluminum and certain plastics, and cures to a hard, anti-scratch film with excellent coverage and vertical hang. It self-seals in two coats.
Where it fits. Exterior doors and entry systems, outdoor furniture, railings, shutters and painted or clear-coated metal and composite parts. Over 861 neutral primer on bare wood.
Mixing. 892 must be catalyzed; there is no 1K option. Add 15% hardener by volume:
- NCW-105 long pot life: about 4 hours
- NCW-80: about 3 hours of pot life
Don't run the catalyzed mix through a pre-heater.
Application. One or two coats, with surface, product and air above 54°F. Recoat within 3 hours if a second coat is needed.
- Airless: 310 or 410 fine-finish tip at 1,700 to 2,200 psi
- HVLP: 4- or 5-stage turbine minimum, 1.8, 2.0 or 2.5 needle, reduce up to 10% with 1034 flow reducer if needed
Novalk data sheet (rev. 8-2026).
- Spread rate: 125 to 150 g/m² per coat
- Vertical hold: 250 microns wet (about 10 mils)
- Yield: 4 to 6 m² per kg (about 43 to 65 sq ft per kg)
Exterior use. Low VOC, zero emissions, water clean-up. Sheens 15 and 30 in 4 KG. Meets or exceeds KCMA standards.
Documentation
Configure your order