Product images are representative. Containers, labels, and packaging may differ from what's shown.
About this product
Novalk 539 is the sanding sealer for the water-based line: a high-solids clear (about 32% by weight) with excellent flow and strong vertical hang, made to build quickly, dry fast and sand flat. The Novalk topcoats are self-sealing, so 539 is optional, but on open-grained wood, stained work, or any job where you want a dead-flat base and faster build, a sealer coat first pays for itself in the topcoat.
Where it fits. Under any Novalk water-based topcoat, clear or white, on raw or stained interior wood. Meets or exceeds KCMA standards.
Mixing. 1K straight from the can, or catalyzed for a harder, better-adhered base. Novalk specifies NCW-105 at 5% by volume, which gives about 3 hours of pot life; NCW-80 gives about 2 hours. If it needs thinning, add up to 10% 1034 flow reducer and mix well. Don't run a catalyzed mix through a pre-heater.
Application. One or two coats at 4 to 5 wet mils. Sprays, brushes or rolls; for brush or roll add 1034 flow additive. Touch-dry in 30 minutes, sand and recoat in 2 to 4 hours. Sand with 320-grit before topcoat.
Novalk data sheet (rev. 8-2026).
- Spread rate: 100 to 120 g/m² per coat
- Vertical hold: 120 microns wet
- Yield: 4 to 6 m² per kg (about 43 to 65 sq ft per kg)
Interior use. Low VOC, zero emissions, water clean-up. 4 KG.
Documentation
Configure your order