Product images are representative. Containers, labels, and packaging may differ from what's shown.
About this product
NC968 is the hardener half of the Novalk high-gloss system. Mixed 1:1 by volume with NA16023 clear or NA16017B white polyacrylic topcoat, it gives the mirror finish its chemical resistance and hardness, and its cure profile is what lets the film be cut and polished at 48 hours without dragging.
Mixing. 1:1 by volume with the topcoat, then reduce the mix 20 to 30% with NU4300 reducer; in hot, humid conditions use NU4608 in its place. Pot life is 3 hours. Add the hardener slowly while stirring, and mix only what you can spray inside the pot life; warm shops shorten it.
Contains isocyanates. Industrial use only: read the safety data sheet and wear the protective equipment it calls for, including an air-supplied respirator where required. Keep the can tightly closed; moisture in the air will react with it. 5 LT.
Available options