NA16023 · Novalk · Interior · Solvent
Clear PU High Gloss Topcoat
Clear 2K polyacrylic high-gloss topcoat for show-quality finishes. Hardened 1:1 with NC968.
Product images are representative. Containers, labels, and packaging may differ from what's shown.
About this product
Novalk NA16023 is the mirror. A two-component clear polyacrylic topcoat built for full-gloss, show-quality work, with a surface that can be sanded and buffed to a true mirror after 48 hours. 40% solids by weight. It is a clear topcoat only, not a tint base.
Where it fits. High-gloss kitchen cabinets and dining, living and bedroom furniture: any surface that will be judged in reflected light. Meets or exceeds KCMA standards for heat and humidity, cold check, chemical resistance and film swell.
Mixing. Harden 1:1 by volume with NC968 high-gloss catalyst, then reduce 20 to 30% with NU4300 reducer. In hot, humid conditions use NU4608 in its place. Pot life is 3 hours; mix only what you can spray inside it.
Application. Air-assisted airless or conventional spray. Two to three coats at 4 to 6 wet mils, sanding with 320-grit or finer between coats.
Dry times at 5 wet mils: dust-free 30 minutes, handle 60 minutes, sandable in 2 to 3 hours, overcoat at 4 hours, polish at 48 hours.
Keep the total finish under 6 mils dry. Heat or oven curing speeds the cure considerably. Keep any unused mix covered; pot life shifts with the reducer and the shop temperature. Shelf life 24 months. Clean finished work with mild soap and warm water, not furniture polish. About 471 g/L VOC. Solvent clean-up. 5 LT.
Configure your order